RS 100 rack profile rail 156 mm, cross insert for slotted wall pair 300

Circuit boards only stand safely in a container when they are held in a guide. The rack profile rail 156 of the Rack System 100 is the cross insert for the slotted wall pair 300 and fits the 300 x 200 mm container, so it extends an existing rack without any change to the container itself.

Benefits

• Outer size of 156 mm matched to the slotted wall pair 300, so the rail does not have to be cut to length.
• Fitted crosswise, the boards stand guided inside the 300 x 200 mm container instead of loose.
• At 50 g the added weight per rail stays low even with several inserts per container.
• Part of the Rack System 100, where slotted walls and rails engage without adaptation.
• Minimum order quantity of 1 and an order increment of 1, so a rack can be built up rail by rail.

Application

The rail is used in board processing and handling whenever populated assemblies are stored upright in the 300 x 200 mm container or moved between production steps. Inside the ESD protected area guided storage replaces stacking by hand, leaving contact areas and components untouched. The pitch inside the rack comes from the slotted wall, while the rail itself is pushed crosswise into the slotted wall pair 300.