Slotted Wall 400 for RS 180 Rack System with Base Stop Type 022, 355 x 22 x 345 mm

When a board slides too far down a slot, its bottom edge meets the container floor and the board ends up leaning. This size 400 slotted wall therefore carries base stop type 022, which limits how far a board can travel. Outer size is 355 x 22 x 345 mm at 0,53 kg, in the non-reinforced version.

Benefits

• Base stop type 022: limits insertion depth, so every board sits at the same height and is picked with the same grip.
• Outer size 355 x 22 x 345 mm: the size 400 build of the RS 180 rack system, matched to the profile rails of the same range.
• One board per slot: neighbouring assemblies never touch, components and solder joints stay untouched in transit.
• Slim 22 mm section: the wall costs little of the container width, the rest is left for boards.
• 0,53 kg of its own: a pair of walls and rails stays manageable by hand, even in a loaded container.

Applications

The version with a base stop is chosen where boards are taken out and put back repeatedly, for instance in test, at a rework station and in staging ahead of final assembly. With every board at the same height you can see at a glance which position is still free, and a hand reaching into the rack always meets the same edge.