ESD swivel castor 200 mm, top plate 137 x 105 mm, conductive solid rubber - A1-ESD EP0806084

On long routes and uneven shop floors the wheel diameter decides how much force the push handle takes. This swivel castor offers 200 mm, the largest size of this design, and runs on an electrically conductive solid rubber tread that keeps the discharge path to the floor intact.

Benefits

• Wheel diameter of 200 mm keeps the force at the push handle low and lets the trolley run over joints and cable ramps.
• Black solid rubber tread, electrically conductive, so the discharge path from trolley through castor to floor stays intact.
• Steel sheet wheel centre with a bolted wheel axle, the castor can be checked on the trolley and taken apart if needed.
• Swivel head with a double ball race, the castor lines up with the direction of travel on small steering inputs.
• Pressed steel housing, bright zinc plated and blue passivated, which stands up to moisture and corrosion in shift operation.
• Swivel head guard keeps threads, chips and film residue out of the ball race.
• Top plate fitting with a 137 x 105 mm bolt hole pattern, so the castor replaces existing castors of the same pattern without reworking the frame.

Technical data

Application

This size is used under heavy transport frames, batch carriers and supply trolleys that cover long routes between store, production and test area. The large wheel diameter keeps rolling resistance low and is gentle on the floor covering at the same time. The range covers further wheel diameters.