ESD extraction arm DN100, 3 joints, 1,185 mm, conductive PP, black, table mounting - Alsident 100-5545-1-6

A little more room than the shorter bench arms: 1,185 mm reach over 3 joints, so wider work surfaces are covered from a single mounting point. Tubes and joints in conductive black polypropylene dissipate charges, tested for ESD areas to IEC 61340-5-1 and for explosive atmospheres with marking Ex II 1 GD. System 100 is designed for 140 to 400 m³/h with a Ø100 mm tube.

Benefits

• Tested for ESD areas to IEC 61340-5-1 and for ESD/Ex areas to EN 80079-36:2016 and EN 80079-37:2016 (ATEX directive 2014/34/EU)
• Fixed earth cable for Ex areas plus a separate earth cable with 1 MΩ safety resistor for ESD areas included
• Self-supporting design with threaded rods and load-bearing springs inside the arm
• Integrated damper that sits outside the airflow when open for maximum throughput
• Dismantled without tools for cleaning, maintenance-free polyethylene (PE) O-rings

Specifications

Applications

• Laboratories handling solvent vapours in ATEX zones
• Ex areas in the chemical and pharmaceutical industry
• ESD workstations in electronics manufacturing, for example soldering or bonding

Compatibility and scope of delivery

• Part of Alsident System 100. Arm, hood and bracket are ordered separately
• Matching hoods: 1-10024-6 (Ø200), 1-10036-6 (Ø350), 1-10035-6 (Ø385), 1-10050-6 (Ø500), 1-1004228-6 (420 x 280 mm)
• Table bracket per manufacturer overview: bracket 2-10035, for long bench arms U-profile 30-100-5 to reinforce the base tube
• Protective grid 5-18-6 against foreign objects being sucked in, available as accessory