ESD safety low shoe TX 40 S2 unisex width 12, SOFT nubuck leather, black/royal blue - Atlas 39712

Part of every workforce orders a size up because the standard width pinches. That is exactly what the TX 40 ESD in width 12 is for. It is the same safety low shoe in class S2 to EN ISO 20345:2012 made of roughly 2 mm SOFT nubuck leather, with a steel toe cap rated for 200 joules and 15 kN and an MPU INNOFLEX sole, only built on a distinctly wider last.

Why this model

• Charge dissipation as the first argument. The shoe is ESD compliant and keeps the resistance measured by the person-shoe-floor method of DIN EN 61340-5-1 below 100 MOhm. Static charge on the wearer drains through the sole in a controlled way instead of building up on the body. Inside an EPA that is what stops a component failing because somebody walked from the bench to the machine.
• S2 in plain words. On top of the S1 package with closed heel, antistatic build and energy-absorbing heel area comes the water-repellent upper. Spilled cleaner or a splash of coolant does not soak straight through and the foot stays dry through the shift.
• Steel toe cap with tested figures. The anatomically shaped toe cap withstands at least 200 joules of impact energy and at least 15 kN of compression to EN ISO 20345:2012. That is a 20 kilogram part dropping onto the forefoot from roughly one metre.
• SOFT nubuck leather, about 2 mm thick. The full-grain cowhide is particularly breathable and feels soft from day one. There is no long breaking-in period, which saves complaints when a whole department is equipped in one order.
• MPU INNOFLEX system as a sole concept. From first to last ground contact the sole guides the forces along the same line, the INNOFLEX LINE, from heel to toe. The CLOUDZONE in the heel absorbs the energy and the large MPU tread areas return it into the next step.
• Width 12 for broad feet. This model comes from the ATLAS multi-width system and runs noticeably wider than the already generous standard width 10. For wearers who otherwise order a size up to avoid pressure points, this is the clean answer.

The abrasion-resistant MPU toe bumper extends service life in kneeling work, and the MPU REBOUND SYSTEM links a pressure-relieving insole to the responsive MPU sole. The aktiv-X functional lining regulates moisture actively and dries quickly. The outsole is rated SRC. For orthopaedic insoles the model qualifies to DGUV rule 112-191, which together with width 12 also covers difficult fitting cases.

Areas of use

Electronics manufacturing and assembly, test bay and service, order picking and stores inside the EPA, maintenance in temperature-controlled halls. Width 12 addresses wearers with broad feet, a high instep or insole fitting. For permanently wet floors or outdoor work with puncture risk an S3 model belongs on the foot.

Standards and conformity

• EN ISO 20345:2012, protection class S2
• Slip resistance SRC, tested on ceramic with detergent and on steel with glycerine
• ESD compliant to DIN EN 61340-5-1, person-shoe-floor resistance below 100 MOhm
• PPE Regulation (EU) 2016/425, risk category II
• Orthopaedic insoles to DGUV rule 112-191

Sizes

Available in sizes 36 to 49 in width 12. The sales unit is one pair. This listing covers the full size range and the size is selected at ordering.