ESD safety shoe SL 80 blue 2.0 S2, SOFT nubuck leather, width 12 extra wide, black/royal blue - Atlas 44712

The SL 80 blue 2.0 in width 12 is the extra wide version of this model, meant for everyone whose foot presses at the ball even in the generously built Atlas standard width 10. The shoe is ESD compliant and certified in protection class S2 to EN ISO 20345:2022. The water-repellent SOFT nubuck carries the S2 property, the alu-tec aluminium cap takes 200 joules of impact energy and 15 kN of compression, and the abrasion-resistant MPU toe bumper guards the area above the cap.

What sets this model apart

• Dissipate the charge, do not collect it. The shoe is ESD compliant. Measured by the person-shoe-floor method of DIN EN 61340-5-1, the resistance stays below 100 MOhm, so the wearer charge drains to ground in a controlled way. In practice that means no component fails from a discharge on the walk between bench and machine. The plain antistatic requirement of EN ISO 20345, 100 kOhm to 1000 MOhm, does not cover this. It protects the person, not the electronics.
• S2 in plain words. S2 covers everything S1 offers, a closed heel, antistatic construction and an energy-absorbing heel region. On top comes a water-repellent upper, tested for water absorption and water penetration to EN ISO 20345. A spilled cup or a freshly mopped hall floor stays without consequence.
• SOFT nubuck leather as the upper. Atlas works exclusively with carefully selected cattle hides. The soft nubuck needs hardly any breaking in, takes on the shape of the foot and stands up to daily plant use considerably longer than a textile fabric.
• alu-tec aluminium cap instead of steel. It passes the same test of 200 joules impact energy and 15 kN compression to EN ISO 20345, yet weighs less and shifts the centre of gravity towards the middle of the foot. That helps prevent trips caused by imbalance. Aluminium behaves thermally neutral and forms no cold bridge into the shoe.
• INNOFLEX outsole with MPU tread zones. The sole complex guides the force along the INNOFLEX LINE from heel to toe. The CLOUDZONE in the heel absorbs the energy and the large MPU tread zones return it into the next step. The 3D cushioning system adds a pressure-relieving insole to the responsive MPU sole. Anyone spending eight hours on a concrete floor notices the difference by the evening.
• Width 12 for broad feet. At Atlas, width 10 is already the generously shaped standard last. Width 12 goes beyond it as the extra wide step of the multi-width system. Anyone whose ball of the foot presses in standard shoes gets the right last here instead of buying a size up and then sliding in the heel.

Technical data

Areas of use

Module assembly and test field, maintenance, goods-in and dispatch inside the EPA, stores and order picking. The water-repellent upper tolerates cleaning water and condensate on the floor. Where sharp-edged parts lie around, a penetration-resistant midsole is required in addition.

Standards and conformity

• EN ISO 20345:2022, protection class S2
• Slip resistance SR to EN ISO 20345:2022
• ESD compliant to DIN EN 61340-5-1, person-shoe-floor resistance below 100 MOhm
• Antistatic construction to EN ISO 20345, resistance between 100 kOhm and 1000 MOhm
• PPE Regulation (EU) 2016/425, risk category II
• Orthopaedic insoles to DGUV rule 112-191

Sizes

Available in sizes 36 to 49 in width 12, the extra wide step of the Atlas multi-width system. The sales unit is one pair. This listing covers the full size range, the size is chosen at ordering. The model is approved for orthopaedic insoles to DGUV rule 112-191, the marking inside the shoe is decisive.