ESD occupational sandal BS 46 O1, SportLine upper, width 10, black/royal blue - Atlas 54000

Not every workstation in electronics manufacturing needs a toe cap. Where nothing can drop on the foot but every discharge can cost a component, occupational footwear to EN ISO 20347:2022 in class O1 is enough. The BS 46 does without a steel cap and still keeps resistance below 100 MOhm to DIN EN 61340-5-1.

What the shoe delivers

• Body-shoe-floor resistance below 100 MOhm to DIN EN 61340-5-1. The footwear standard alone only calls for the antistatic range from 100 kOhm to 1,000 MOhm, so the ESD proof sits below that and protects the component, not just the wearer.
• Class O1 to EN ISO 20347:2022 is the occupational footwear class without a toe cap: closed seat region, antistatic construction and an energy absorbing heel area.
• MPU INNOFLEX outsole system. The CLOUDZONE in the heel absorbs impact forces, the MPU midsole cushions across the full surface and returns energy into the push-off.
• SportLine textile upper, air permeable, breathable and hydrophobic, therefore water repellent and quick drying.
• clima-stream concept combining a breathable upper, thermoregulating lining and Klima Komfort insole. Atlas puts the comfort temperature inside the shoe at 32 degrees Celsius, and a deviation of only 1 to 2 degrees already makes the day uncomfortable.
• Width 10 is the Atlas standard width and is already built on a broad, foot-friendly last.

Fields of use

• ESD protected areas without mechanical foot risk, such as placement, test bench and repair
• Laboratory, measuring room and quality assurance
• Picking of light electronic goods
• Warm rooms where a closed shoe is unnecessary

Standards and conformity

The shoe is built as occupational footwear to EN ISO 20347:2022 in class O1 SR and carries the ESD marking to DIN EN 61340-5-1. It has no toe cap, but Atlas guarantees a body-shoe-floor resistance below 100 MOhm. The occupational footwear standard only defines the antistatic range from 100 kOhm to 1,000 MOhm. DGUV 112-191 names 100 kOhm as the lower limit so that limited protection against dangerous body current is retained for work up to 230 volts. The manufacturer is ATLAS-Schuhfabrik GmbH und Co. KG in Dortmund.

Sizes

Available in EU sizes 36-48 in width 10. This item covers the whole size range, you pick the size when ordering.