ESD safety sandal CL 46 S1, CleanLine upper, width 12, white - Atlas 24212

In hygiene areas the shoe size is usually issued, the width rarely. The CL 46 in width 12 is the extra wide build of the white safety sandal and keeps every feature of the standard width: class S1 to EN ISO 20345, steel cap for at least 200 joules of impact energy and at least 15 kN of compression, CLEANLINE upper material and ESD compliance to DIN EN 61340-5-1. EU 36 to 49.

What this model delivers on the floor

• The wearer's charge is drained in a controlled way instead of discharging into a component. The shoe is ESD compliant to DIN EN 61340-5-1. For that marking ATLAS guarantees a resistance below 100 megohms across the person, footwear and floor measuring chain, while the shoe standard itself only defines the antistatic band from 0.1 to 1000 megohms.
• S1 in plain words: closed heel area, antistatic build, 20 joules of energy absorption in the heel and a fuel-resistant outsole. Even as a sandal the heel stays closed, only the forefoot area is open.
• The anatomically shaped steel toe cap protects the toes to EN ISO 20345 against at least 200 joules of impact energy and at least 15 kN of compression. That is the full toe protection of a safety footwear cap, not the lower test level of occupational footwear.
• Width 12 is the extra wide build of this range. It is meant for wearers whose foot is pinched by the standard last, and it turns a complaint at the issue counter into protective equipment that is actually worn. Every protective feature stays identical to the standard width, only the volume of the last changes.
• The CLEANLINE upper is water-repellent, bacteria and odour inhibiting and still breathable. That is exactly the combination hygienically sensitive indoor areas ask for. The material is light and supple yet tear-resistant, joined by the aktiv-X functional lining and the clima-stream concept with its Klima Komfort insole.
• Cushioning for eight hours on your feet. The MPU INNOFLEX outsole guides force from heel to toe, and the MPU REBOUND SYSTEM of pressure-relieving insole and light MPU foam delivers pressure relief, damping and rebound in one sole build.

Areas of use

Hygienically sensitive indoor areas, cleanroom and cleanroom ante-area, medical device and laboratory production, pharmaceutical and food environments, and electronics production inside the EPA. Wherever white workwear is mandatory, the floor stays dry and the shoe has to drain charge.

Standards and conformity

EN ISO 20345, protection class S1, slip resistance SRC. SRC means the shoe passed both tests, on ceramic tile with detergent and on steel floor with glycerine. Atlas lists article 24200 with exactly this marking, S1 SRC to EN ISO 20345, without naming an edition. ESD compliant in the sense of DIN EN 61340-5-1, the standard for the electrostatic protected area. Personal protective equipment of risk category II under Regulation (EU) 2016/425, CE marked, EU declaration of conformity available from the manufacturer. Approved for orthopaedic insoles under DGUV rule 112-191, the marking inside the shoe is what counts. Made by the ATLAS shoe factory in Dortmund.

Sizes

This item covers EU sizes 36 to 49. The width is fixed at width 12, the size is selected when ordering. One pair is supplied.