ESD safety shoe ERGO-MED 735 XP S3S width 13, nubuck leather, unisex - Atlas 86513

Anyone moving between test bench, assembly and warehouse in electronics production needs a shoe that dissipates the wearer charge in a controlled way. The ERGO-MED 735 XP keeps the person-shoe-floor resistance to DIN EN 61340-5-1 below 100 MOhm and prevents the discharge that ruins a sensitive component on the way to the machine. This version runs in special width 13. Anyone who used to buy a size up just to get room across the ball of the foot can now stay with the actual foot length.

Why this model

• Protection class S3S SR to EN ISO 20345:2022. That means a toe cap rated for 200 joules of impact energy and 15 kN compression, a closed heel area with energy absorption, antistatic construction, tested resistance to water penetration and water absorption, and a cleated outsole.
• Penetration protection at the tougher test level. The XP insert withstands the thin 3.0 mm nail, not only the 4.5 mm one. It is metal-free, covers the whole sole area and lets the foot flex as it rolls off.
• SOFT nubuck leather of roughly 2 mm thickness. Full grain cowhide, breathable and soft from the first day, so the upper needs no breaking in.
• MPU INNOFLEX system outsole with MPU REBOUND SYSTEM cushioning. A pressure relieving insole and a responsive polyurethane sole absorb the impact of every step, which tells after eight hours on your feet.
• aktiv-X functional lining. It actively regulates moisture inside the shoe, does not stain and stays abrasion resistant, and the shoe dries out overnight.
• blueline for orthopaedic supply. Insoles and certified modifications such as sole and heel elevations to DGUV rule 112-191 are approved without voiding the type examination.

Technical data

Areas of use

Electronics manufacturing and test areas, assembly, maintenance, warehouse and yard. Because the upper is tested against water penetration and the outsole is cleated, the shoe does not stop at the shop door. The approval for insoles and modifications also makes this the default model wherever the company doctor or the orthopaedic supplier has a say.

Standards and conformity

EN ISO 20345:2022, protection class S3S with the additional requirement SR. S3S covers everything class S2 demands and adds a non-metallic penetration resistant insert tested with the thin 3.0 mm nail plus a cleated outsole. SR documents slip resistance on tile with glycerine. Since the 2022 edition the test on tile with detergent is a basic requirement and the old codes SRA, SRB and SRC no longer apply. The ESD property is tied to DIN EN 61340-5-1. Atlas states the person-shoe-floor resistance as below 100 MOhm. The antistatic range of the shoe standard itself runs from 100 kOhm to 1,000 MOhm. DGUV rule 112-191 names 0.1 MOhm as the lower limit for limited protection against electric shock when working up to 230 V. Personal protective equipment of risk category 2.

Sizes

This item covers sizes 36 to 50 and is delivered as one pair. This version is cut to special width 13. Atlas builds the ERGO-MED 735 XP in standard width 10 as well as in widths 12, 13 and 14, with the same length range.