Brushless ESD Electric Screwdriver 0.5-1.5 Nm with Screw Counter - HIOS BLG-5000X ZERO1-18
-
This Item:
€860.00
-
Weidmüller 900747. Electric screwdriver 0,3 - 2,5 Nm
€361.20
-
Brushless ESD Electric Screwdriver with Count Control 0.7-2.8 Nm, 1/4" - HIOS BLG-7000XBC2
€1,440.00
The HIOS BLG-5000X ZERO1-18 is a brushless ESD electric screwdriver with 0.5-1.5 Nm and a built-in screw counter. The ZERO1 pulse system monitors every fastening and reports errors directly on the tool, without an external counter box.
Features
- Torque 0.5-1.5 Nm continuously adjustable, shut-off clutch
- Built-in screw counter and pulse system (ZERO1)
- Direct Teaching: drive 6 screws into the workpiece and the driver learns the motor pulses itself (limits +10 % / -10 %)
- Detects wrong or floating screws, cam-out, stripped threads and cross-threading
- Remaining count in the display (1-99 screws), green PASS and red FAIL LED, error codes 1-3
- Signal output via relay box BLOP-AF for PLC, signal lamp or buzzer
- ESD design, brushless motor
- Lever and push start, selectable via L/P switch
- Bit holder 1/4" hex (6.35 mm)
Technical data
| Torque | 0.5-1.5 Nm |
| Torque kgf·cm | 5-15 |
| Torque lbf·in | 4.3-13 |
| Speed | 1,200 / 1,800 rpm |
| Speed tolerance | ±10 % |
| Bit holder | 1/4" hex (6.35 mm) |
| Start type | lever and push |
| Motor | brushless |
| ESD | yes |
| Screw range | machine screws M2.3-M3.0, tapping screws 2.0-2.6 mm |
| Screw counter | 1-99 |
| Teaching | 6 screws, limits +10 % / -10 % |
| Cable | 6-pin, 2 m |
| Voltage | 30 VDC (HI level) via controller |
| Weight | 0.425 kg |
| Length | 235 mm |
| Grip diameter | 38 mm |
| Ambient temperature | +5 to 40 °C |
| Scope of delivery | without controller |
Application
For series assembly in electronics and precision mechanics where the number of screws and the quality of each joint must be verified. Suitable for machine screws M2.3-M3.0, tapping screws 2.0-2.6 mm.
Compatibility
Operates with the BLC-70-EU-HK controller (230 VAC, 20/30 VDC) and the 6-pin screwdriver cable RP50-CL (2 m). On the BLC-70-EU-HK the driver is operated at speed level HI only. Signal output via relay box BLOP-AF. Screwdriver stands VMS-40 and VMS-50 with adapter VMS-0900-BLG45. Torque check with the HP-100 2025 tester. Variants with a different torque or speed range: BLG-5000X-ZERO-HT.
| ESD version | ESD (antistatic) |
|---|---|
| Manufacturer Nr. | BLG-5000X ZERO1-18 |
| Manufacturer | Hios |
| Weight | 0.425000 |
| HS-Code | 84672985 |
| GPSR manufacturer information | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Article authenticity | Original product |
| Condition of article | New |
| Min torque (Nm) | 0.500000 |
| Max torque (Nm) | 1.500000 |
| Max speed (rpm) | 1800.000000 |
| Start system | Lever and push start |
| Drive | 1/4 inch hexagon |
| Brushless motor | Ja |
