Transducer 3DMC017, 17 Nm, size 3 - Bosch Rexroth 0608820112

Size 3 is often chosen for its output drive or spindle spacing, even when the joint itself needs only moderate torque. That is where the 3DMC017 transducer with 17 Nm nominal torque fits: the measuring range stays close to the actual torque while the mechanics match size 3.

Benefits

• Nominal torque 17 Nm, the lower step of size 3
• Torque and angle measured inside the spindle
• Ratio 1, typical efficiency 1
• Installed length 118.6 mm, identical to the 3DMC060, so the two swap without rebuilding the spindle
• Redundant setup with a second 3DMC017 via the redundancy adapter

Specifications

Applications

• Size 3 spindles for moderate-torque joints
• Multi-spindle systems with torque and angle documentation
• Redundant measurement on safety-relevant joints

System compatibility

• Rexroth Tightening System 350, size 3 fastening spindles
• Redundancy adapter for the second transducer