TASS brake test element TR1, 3 to 6 Nm - Bosch Rexroth 3609438114

Deviations on fixtured nutrunners are often noticed late. The TASS element TR1 3-6 Nm moves the check to the installed spindle itself and reports immediately after each test run whether torque, angle and linearity are in order. As the smallest size of the TASS elements, TR1 has a 15 mm width across flats and a length l3 of 121 mm, and weighs 0.22 kg.

Benefits

• Three parameters in one pass: two torque values, angle and linearity, no second test setup required
• Immediate feedback after the test run, so release or readjustment can be decided on the spot
• Testing in the installed state, the spindle stays in the machine and the cycle is barely interrupted
• Characteristic values M1 3 Nm and M2 6 Nm cover the working range stated in the designation, M3 is specified as 7.5 Nm
• Size TR1 at 0.22 kg with a 15 mm width across flats, easy to handle at the station

Specifications

Applications

• Daily validation of tightening stations in the 3 to 6 Nm range
• Setting nutrunners after maintenance or modification of the spindle
• Checks of handheld and fixtured nutrunners with a target value in this torque band

System compatibility

• TASS (Tool Analysis and Setup System) by Bosch Rexroth, size TR1 with elements from 1 to 10 Nm
• Adapters match the interface to the joint (hex socket, external hex, Torx, internal thread)
• TASS FIX TR1 fixture (Bosch Rexroth 3609438001) for fixed mounting at the test station