TASS brake test element TR2, 18 to 35 Nm - Bosch Rexroth 3609438127

With 18 to 35 Nm, the TASS TR2 brake test element covers a narrow torque band and suits spindles whose target value lies within it. Testing takes place in the installed state, two torques, angle and linearity in one pass. As the second size of the TASS elements, TR2 has a 30 mm width across flats and a length l3 of 176.5 mm, and weighs 1.2 kg.

Benefits

• Characteristic values M1 18 Nm and M2 35 Nm cover the working range stated in the designation, M3 is specified as 43.8 Nm
• Testing in the installed state, the spindle stays in the machine and the cycle is barely interrupted
• Three parameters in one pass: two torque values, angle and linearity, no second test setup required
• Suitable for short intervals, for example daily, so deviations are detected before they carry over into many joints
• Size TR2 at 1.2 kg with a 30 mm width across flats, easy to handle at the station

Specifications

Applications

• Daily validation of tightening stations in the 18 to 35 Nm range
• Setting nutrunners after maintenance or modification of the spindle
• Checks of handheld and fixtured nutrunners with a target value in this torque band

System compatibility

• TASS (Tool Analysis and Setup System) by Bosch Rexroth, size TR2 with elements from 6 to 35 Nm
• Adapters match the interface to the joint (hex socket, external hex, Torx, internal thread)
• TASS FIX TR2 fixture (Bosch Rexroth 3609438002) for fixed mounting at the test station