TASS brake test element TR2, 13 to 25 Nm - Bosch Rexroth 3609438125

For joints between 13 and 25 Nm, the TASS element TR2 provides the matching test load. It is applied directly to the spindle and delivers two torque values, the angle of rotation and a linearity result in one run. As the second size of the TASS elements, TR2 has a 30 mm width across flats and a length l3 of 176.5 mm, and weighs 1.2 kg.

Benefits

• Characteristic values M1 13 Nm and M2 25 Nm cover the working range stated in the designation, M3 is specified as 31.3 Nm
• Three parameters in one pass: two torque values, angle and linearity, no second test setup required
• Testing in the installed state, the spindle stays in the machine and the cycle is barely interrupted
• Immediate feedback after the test run, so release or readjustment can be decided on the spot
• Size TR2 at 1.2 kg with a 30 mm width across flats, easy to handle at the station

Specifications

Applications

• Daily validation of tightening stations in the 13 to 25 Nm range
• Setting nutrunners after maintenance or modification of the spindle
• Checks of handheld and fixtured nutrunners with a target value in this torque band

System compatibility

• TASS (Tool Analysis and Setup System) by Bosch Rexroth, size TR2 with elements from 6 to 35 Nm
• Adapters match the interface to the joint (hex socket, external hex, Torx, internal thread)
• TASS FIX TR2 fixture (Bosch Rexroth 3609438002) for fixed mounting at the test station