Additional plate 0.5 mm for longer lead cutting length for SUPERCUT/LN5L - Iteco 340214

This additional plate of 0.5 mm belongs to the long SUPERCUT/LN5L model with its 53 x 93 mm cutting area. It raises the cutting height from 3.2 mm to 3.7 mm and is the finest correction step available for the longer machine.

Benefits

• 0.5 mm material thickness, the smallest step, sized for the 93 mm long cutting area of the SUPERCUT/LN5L.
• Cutting height of 3.7 mm instead of the 3.2 mm of the standard stationary plate Iteco 340211.
• Covers the whole long cutting zone so that wide connectors are cut evenly in one stroke.
• Only 0.5 mm of the 3 mm maximum additional thickness is used.
• No machine conversion, the pneumatic foot pedal actuation at 6 bar stays unchanged.

Technical data

Applications

Long connectors and rows of components on the SUPERCUT/LN5L where the remaining lead length has to be raised by only a few tenths of a millimetre, for example flat mounted pin headers.

Compatibility and scope of delivery

The plate belongs to the SUPERCUT/LN5L cutting machine (Iteco 7915.041L) and is fitted on its 3.2 mm stationary plate. For the SUPERCUT/LN5 model, order the plate of the same thickness, Iteco 340114, instead. Scope of delivery: one additional plate of 0.5 mm, no further accessories. Made in Italy by Iteco.