Additional plate 2 mm for longer lead cutting length for SUPERCUT/LN5L - Iteco 34021403

At 2 mm this additional plate is the thickest version listed for the SUPERCUT/LN5L in the 2026 price list. It raises the cutting height from 3.2 mm to 5.2 mm and leaves lead reserve for clinching or for thicker boards over the full 93 mm length.

Benefits

• 2 mm material thickness, the strongest plate listed for the long model.
• Cutting height of 5.2 mm compared with the 3.2 mm of the standard stationary plate Iteco 340211.
• Two thirds of the 3 mm maximum additional thickness, so reserve remains.
• The same lead length across the full 53 x 93 mm cutting area, even with multi pole connectors.
• No machine conversion needed, foot pedal and the 6 bar air supply remain unchanged.

Applications

Thick or multilayer boards with long connectors, leads that are bent over after insertion, and assemblies with a defined lead reserve for later test points.

Compatibility and scope of delivery

The plate belongs to the SUPERCUT/LN5L cutting machine (Iteco 7915.041L) and is fitted on its 3.2 mm stationary plate. For the SUPERCUT/LN5 model, order the plate of the same thickness, Iteco 34011418, instead. Scope of delivery: one additional plate of 2 mm, no further accessories. Made in Italy by Iteco.