Additional plate 1 mm for longer lead cutting length for SUPERCUT/LN5L - Iteco 34021401

On the long SUPERCUT/LN5L cutting machine this additional plate of 1 mm is the most common step. It raises the cutting height from 3.2 mm to 4.2 mm and gives exactly one extra millimetre of lead length across the full 53 x 93 mm cutting area.

Benefits

• 1 mm material thickness, one clean millimetre of extra cutting length on the long 53 x 93 mm cutting area.
• Cutting height of 4.2 mm compared with the 3.2 mm of the standard stationary plate Iteco 340211.
• Even support over the full length, so that all leads of a long connector keep the same length.
• Changed without tools, the machine output of up to 3000 components per hour is retained.
• One third of the 3 mm maximum additional thickness.

Applications

Series production on the SUPERCUT/LN5L with a specified one millimetre gap between component and board, for example with long pin and socket strips or terminal blocks.

Compatibility and scope of delivery

The plate belongs to the SUPERCUT/LN5L cutting machine (Iteco 7915.041L) and is fitted on its 3.2 mm stationary plate. For the SUPERCUT/LN5 model, order the plate of the same thickness, Iteco 34011416, instead. Scope of delivery: one additional plate of 1 mm, no further accessories. Made in Italy by Iteco.