Static Shielding Film Metal-In PCL100 Clean Series for Cleanrooms, Roll 0.91 m wide, 30.5 to 152.4 m - Desco

Where surface particles on packaging are a risk in the cleanroom, a standard shielding bag is not enough. PCL100 film is tested for low surface particulate to IEST-STD-CC1246E Level 100 and shields ESD sensitive devices from electrostatic fields and discharges. Discharge energy inside stays below 10 nJ per ANSI/ESD STM11.31.

As roll stock, the film can be cut to the length you need and heat sealed into bags of a matching size.

Key benefits

• Cleanroom ready: low surface particulate to IEST-STD-CC1246E Level 100, silicone not detected, free of amines and heavy metals
• Reliable shielding: metal-in laminate with < 10 nJ discharge energy per ANSI/ESD STM11.31
• Dissipative inside and out: interior surface resistance 1 x 10⁴ to < 1 x 10¹¹ ohms, charges drain via a grounded surface or grounded operator
• Your own formats: heat sealable at 149 to 190 °C, for bags in exactly the size your assembly needs
• Traceable: embossed ESD protective symbol and lot code, approx. 40 % transparency for visual inspection

Applications

Packaging wafers, semiconductors, PCBs and assemblies in cleanrooms and production areas with particle requirements, making custom bag sizes with a heat sealer, protection during transport inside and outside the EPA.

Standards

Meets ANSI/ESD S20.20 and ANSI/ESD S541 for ESD shielding packaging inside and outside an EPA, static control bag to ANSI/ESD S11.4 Level 3. Cleanliness tested to IEST-STD-CC1246E Level 100. RoHS, REACH and conflict minerals compliant.