Upgrade-Kit für Lötkolben i-TOOL MK1 auf MK2 - Ersa 0105CDJ-UKIT

A working i-CON MK1 does not have to be scrapped just because its iron is outdated. This kit puts the i-TOOL MK2 (0105CDJ) on the existing station: 150 W at 24 V, room temperature to 350 °C in about 9 seconds and roughly 3 seconds out of 280 °C standby.

What the kit delivers

• About 9 seconds to reach 350 °C and around 3 seconds to recover from standby, so waiting time per joint stays short.
• Tip'n'Turn bayonet lock instead of a screw fitting, giving tool-free tip changes and, according to the manufacturer, 20 to 25 percent better power transfer.
• Heating element and tip are separate parts, so worn 142 series tips are replaced on their own while heating element 016100J stays in the iron.
• Supplied ERSADUR-LF long-life tip 0142CDLF16, straight chisel shape, 1.6 mm wide, rated to 450 °C tip temperature.
• Antistatic design and RoHS compliance, so the iron can be used at an ESD workstation.
• Ceramic 383974 included, converting an existing 0A52 stand to 0A59 level so no second stand is needed.

Application and compatibility

Intended for i-CON MK1 users who want to bring hand soldering places up to MK2 level step by step without buying new stations. Note that the move to tip series 142 also changes the consumable, existing 102 series tips do not fit the MK2.