Lötkolben i-Tool MK2 150W Upgrade Kit mit Spitzenset und Tip’n’Turn-Ablageständer 0A58 - Ersa 0105CDJ58

Moving a running i-CON station to MK2 does not need a new station, it needs a new iron, a matching stand and the right consumables. That is exactly what this kit holds: the i-TOOL MK2 with 150 W at 24 V, the Tip'n'Turn stand 0A58 and six tips from the 142 series, from a 0.5 mm pencil point to a 5 mm chisel.

Benefits in detail

• 150 W at 24 V, room temperature to 350 °C in about 9 seconds and around 3 seconds out of 280 °C standby, so power is back quickly even on ground planes.
• Tip'n'Turn bayonet lock for tool-free tip changes and, per the manufacturer, 20 to 25 percent better power transfer than a screw fitting.
• Six 142 series tips cover fine pitch work through to high mass joints, from 0.5 mm pencil point to 5 mm chisel.
• Stand 0A58 with tip holders and splash guard 0009/SB keeps the tips sorted and the change one handed.
• Heating element 016100J and tip are separate, so worn tips are replaced individually rather than the whole iron.
• Antistatic design and RoHS compliance for ESD workstations.

Technical data

Scope of delivery

• 1 x 0105CDJ i-TOOL MK2 iron with 1.6 mm chisel tip
• 1 x 0142CDLF24/SB chisel tip 2.4 mm
• 1 x 0142CDLF50/SB chisel tip 5 mm
• 1 x 0142ADLF40/SB bevelled tip 4 mm
• 1 x 0142PDLF05/SB pencil point tip 0.5 mm
• 1 x 0142PDLF08/SB pencil point tip 0.8 mm
• 1 x 0A58 Tip'n'Turn stand with tip holders
• 1 x 0009/SB splash guard for stand 0A58

Compatibility

Soldering stations i-CON1 (V) 0IC1100A and 0IC1100V, i-CON2 (V) 0IC2000A and 0IC2200V, i-CON Vario 2 (0ICV2000) and i-CON Vario 4 (0ICV4000). It also fits the MK2 versions of these stations: 0IC1105A, 0IC1105V, 0IC2005A, 0IC2205V, i-CON Vario 2 (0ICV2005) and i-CON Vario 4 (0ICV4005).