ESD synthetic resin worktop, custom size up to 3450x1200 mm, 30 mm thick, 2 mm ABS edges, max. 350 kg - Lista 88.179

When standard worktops do not fit the room, Lista supplies the ESD synthetic resin worktop as a custom size up to 3450 mm wide and 1200 mm deep. The 30 mm board carries up to 350 kg, provided the supports are no more than 1220 mm apart.

Benefits

• Volume-conductive chipboard with HPL laminate: the whole board is electrostatically dissipative, provided it is earthed via the earthing set
• Custom size up to 3450 x 1200 mm for long workstation rows and deep assembly surfaces
• Up to 350 kg load with a maximum support spacing of 1220 mm
• 2 mm black ABS edges on all sides protect the board edges

Colours

This version is available in the following ESD colour, selected when you order:

• Top light grey NCS S 1500-N, edges black

Use and combination

As the work surface for Lista Quattro workstations in EPA areas, at soldering, test and assembly stations and in the electronics lab, when width or depth differ from standard. The matching screw-in nuts and fixings are ordered separately for each base frame.

Notes

• Not compatible with steel edge protection angles.
• For each base frame the corresponding screw-in nuts (pre-mounted) or fixing materials must be ordered separately.
• Earthing set item no. 95.970.000 is not included.
• Sales unit per m², supplied without pre-assembly.