ESD cabinet housing 18x27E, 411x572x533 mm, inner height 450 mm, CODE Lock - Lista 93.226

For a drawer block next to the legs at an assembly or repair station, a height of 533 mm is a practical size. In the 18 x 27 E grid with a width of 411 mm and a depth of 572 mm, an inner height of 450 mm is available for fitting drawers. Drawers are not included and are ordered separately.

Benefits

• Dissipative surface: All painted parts carry the dissipative paint coating developed by Lista, which drains charges in a controlled way.
• CODE Lock: A four to six digit number code replaces the key, opening and locking are manual. No key can get lost or has to be handed over.
• Freely configurable: 450 mm inner height in the 18 x 27 E grid, you put together the drawers and their front heights as needed.

Colours

Choose the ESD colour when ordering from the following options:

• Light grey RAL 7035
• Pale grey NCS S 2403-Y
• Anthracite grey RAL 7016
• Orange NCS S 1080-Y40R

Use and combination

Typical places are assembly, test and repair stations in EPA areas, at EMS providers and in the lab. The dissipative effect requires the cabinet to be properly grounded. Matching items in the 18 x 27 E format include an ESD resin cover plate as a top surface, a ribbed mat for the top, a three-sided roll-off edge, a four-sided roll-off edge with push bar and pairs of ESD castor rails that make the cabinet mobile.

Notes

For loading the drawers, follow the Lista assembly instructions and loading guidelines. Stated load capacities apply to evenly distributed loads.