ESD drawer 18x27E, 306x459 mm, front height 50 mm, 75 kg, standard with single-drawer interlock - Lista 95.492

In the Lista 18 x 27 E format this 50 mm drawer adds a shallow level for small parts and component reels to a cabinet housing. Usable area 306 x 459 mm, load capacity 75 kg. It comes with the standard safety catch including single-drawer interlock.

Benefits

• Dissipative surface: The painted parts carry the dissipative paint coating developed by Lista.
• 17 mm slot grid: The inner walls are slotted all round in units (E) of 17 mm, so the interior can be subdivided individually.
• 75 kg load capacity: standard safety catch with single-drawer interlock, only one drawer opens at a time.

Colours

Choose the ESD colour of the front when ordering:

• Light grey RAL 7035
• Pale grey NCS S 2403-Y
• Anthracite grey RAL 7016
• Orange NCS S 1080-Y40R

Use and combination

The drawer is fitted into a Lista cabinet housing in the 18 x 27 E format, together with drawers of other front heights in any order. The clear height of the housing is decisive, the sum of the front heights must match it. It is used in EPA areas of electronics production, at test and repair stations and in component stores. Dividers in the 17 mm grid subdivide the interior as needed. The dissipative effect requires an earthed cabinet.

Notes

Follow Lista's assembly instructions and loading guidelines. The load capacity applies to an evenly distributed load. Drawers with a 50 mm front height must be fitted in the top position.