ESD drawer 18x27E, 306x459 mm, front height 50 mm, 75 kg, single safety catch right - Lista 95.493

With a front height of 50 mm and 32.5 mm usable height, this drawer is meant for SMD components, small parts and flat tools. It carries 75 kg on a usable area of 306 x 459 mm. The single safety catch on the right is released with one hand and keeps the drawer closed even when the cabinet is unlocked.

Benefits

• Dissipative surface: The painted parts carry the dissipative paint coating developed by Lista.
• 17 mm slot grid: The inner walls are slotted all round in units (E) of 17 mm, so the interior can be subdivided individually.
• 75 kg load capacity: single safety catch on the right, the minimum requirement for mobile drawer cabinets.

Colours

Choose the ESD colour of the front when ordering:

• Light grey RAL 7035
• Pale grey NCS S 2403-Y
• Anthracite grey RAL 7016
• Orange NCS S 1080-Y40R

Use and combination

The drawer is fitted into a Lista cabinet housing in the 18 x 27 E format, together with drawers of other front heights in any order. The clear height of the housing is decisive, the sum of the front heights must match it. It is used in EPA areas of electronics production, at test and repair stations and in component stores. Dividers in the 17 mm grid subdivide the interior as needed. The dissipative effect requires an earthed cabinet.

Notes

Follow Lista's assembly instructions and loading guidelines. The load capacity applies to an evenly distributed load. Drawers with a 50 mm front height must be fitted in the top position.