ESD support column 700 mm, profile 30x60 mm, for mounting on workbench tops, right position - Lista 93.395

This 700 mm ESD support column forms the right-hand end of a low workbench superstructure. It sits at the right edge of the top, weighs only 2.1 kg and is tall enough for a storage level with shelves or bin rails directly above the work area.

Benefits

• Dissipative surface: The painted surfaces carry the dissipative paint coating developed by Lista, which drains charges in a controlled way.
• Hang without screws: the steel profile is perforated on four sides in a 50 mm pitch, so add-on parts hang in and move largely without tools.
• 100 kg capacity: on beech or multiplex tops, 50 kg on Universal, Eterlux, resin and ABS tops.
• Supplied complete: fixing material for screwing onto the top is included.

Colours

Choose the ESD colour when ordering from the following options:

• Light grey RAL 7035
• Pale grey NCS S 2403-Y
• Anthracite grey RAL 7016
• Orange NCS S 1080-Y40R

Use and combination

The column belongs to Lista's universal superstructures and carries adjustable shelves, swivel shelves and other add-on parts above ESD workbenches in electronics production, at test and repair stations and in the lab. It is only suitable for workbench tops made of beech, multiplex, Universal, Eterlux, resin and ABS with a thickness of at least 40 mm. The dissipative effect depends on the setup being properly earthed.

Notes

The outer support columns protrude 15 mm beyond the top as standard. For a flush finish, tops with 30 mm extra length are available, for example 1530 or 2030 mm. For mounting on a 28 or 30 mm worktop of an electrically height-adjustable table (Lista Quattro, Duo, Solo), a counter holder or counter plate is required. Observe Lista's planning note on support column load capacity.