Cross-line laser green 35 m self-levelling with Li-ion battery and hard case - Leica Lino L2G

In bright halls or over long distances a red line quickly disappears. The Leica Lino L2G therefore uses green high-performance diodes at 525 nm and reaches a 35 m working range, or 80 m with the RGR 200 receiver. Levelling accuracy is ± 0.2 mm/m and the automatic pendulum compensates tilts up to ± 4° in under 3 seconds.

Benefits on site

• Green laser lines at 525 nm, up to four times more visible than red according to the manufacturer
• Working range 35 m, up to 80 m with the RGR 200 laser receiver
• Levelling accuracy ± 0.2 mm/m and line accuracy ± 0.3 mm/m
• 5200 mAh Li-ion pack for 15 hours with two beams and up to 28 hours with a single beam
• The UAL 130 universal adapter in the set shifts the height by 130 mm without a tripod
• IP54 against dust and splash water, operating temperature -10 to +50 °C

Technical data

Applications

• Fit-out in bright halls and large rooms
• Drywall, suspended ceilings and stud frames
• Tiling and floor laying over large areas
• Shopfitting, exhibition build and plant installation

Scope of delivery

• Leica Lino L2G-1 green cross-line laser
• Li-ion battery pack with charger and country plugs
• alkaline battery tray
• TWIST 250 magnetic multifunctional adapter
• UAL 130 wall mount and universal adapter
• laser target plate
• rugged transport case
• quick start guide, safety instructions, warranty card
• calibration certificate

Compatible accessories

Accessories released by the manufacturer: Lino Li-ion battery pack 5200 mAh (art. 842427), UAL 130 universal adapter (art. 866131), TRI 70 tripod (art. 794963), TRI 100 tripod with tilting head (art. 757938), CLR 290 clamping pole (art. 761762), RGR 200 laser receiver (art. 866090) and green laser viewing glasses GLB 10G (art. 772796). The 1/4 inch tripod thread fits standard photo tripods and 5/8 inch supports via adapter.

Standards, origin and warranty

Laser class 2 to IEC 60825-1 at 525 nm, ingress protection IP54 to IEC 60529. Every unit leaves the factory with a blue calibration certificate. Country of origin China, customs tariff code 9015301000, EAN 7640110697535. Registered within eight weeks of purchase, Leica Geosystems grants a 3 year warranty on the instrument and 2 years on the Li-ion battery.