Measuring Case Set Gigalab EVO Plus with serial interface and two probes 63 mm - Iteco 9265067

Anyone auditing an EPA who wants to evaluate the results digitally afterwards needs probes and a data output in one piece of luggage. The Gigalab EVO Plus case set holds the meter 9265.066 with serial interface, two probes 9265.065, batteries and the case.

Operating benefits

• The serial data interface of the Plus model hands the 100 stored readings to a computer, copying by hand is no longer needed.
• Two shielded probes of 63 mm with 2.3 kg contact weight each give a reproducible point to point measurement.
• Four test voltages of 10, 100, 250 and 500 V, at 500 V up to 1 Tohm with 5 percent plus 0.03 percent per Gohm.
• Test voltage, humidity and temperature are recorded with every reading and transferred along with it.
• Shielded cable and shielded probe keep interference out of the measuring circuit.
• Case of 5.5 kg total, mains independent operation on 6 alkaline LR6 batteries.

Typical applications

• Periodic auditing of several EPA areas followed by a digital test report.
• Acceptance and documentation of ESD floor coverings and worktops with two identical probes.
• Study of resistance variation against humidity over longer periods.
• Service providers and test laboratories that deliver traceable measurement series to their customers.

Compatibility and scope of delivery

The concentric ring probe 63/30 mm at 2.5 kg (Iteco 9265.070), the counter-electrode 150 x 150 mm (Iteco 9265.047) and the 25 cm T-handle with M5 thread (Iteco 9265.072) fit in addition. Without the serial interface the same case set is available as Iteco 9265.064, the Plus meter on its own as Iteco 9265.066.

Standards and origin

The measured quantities correspond to the resistance measurements described in IEC 61340-5-1 for the EPA. A traceable calibration report is enclosed, Iteco handles recalibration under 9265.042. Made in Italy.