digitale ESD Industrie-Handlötstation 80W, 100°-450°C + Zubehörset 1 - Quick QU3104-SET1

A bench that handles 0402 parts and ground planes in the same shift loses time waiting for recovery. The Quick 3104 senses inside the tip, stays within 2 °C of the setpoint and reaches 350 °C in about 39 seconds.

What accessory set 1 covers

• 80 W ceramic heater, setpoint adjustable from 100 to 450 °C in 1 °C steps
• Two tip shapes out of the box: 960-I needle point at 0.2 mm for fine pitch, 960-3.2D chisel at 3.2 mm for planes and connectors
• TT15 tip reactivator included, dewetted tips are restored at the bench instead of being scrapped
• ESD build with tip to ground resistance below 2 ohm and tip potential below 2 mV, equipotential lead with crocodile clip supplied
• Three stored setpoints and password lock keep a released process temperature from being changed
• Extra brass wool sponge, so tips are wiped without the temperature drop caused by a wet sponge

Specifications

Where it is used

Repair, prototyping and short runs in electronics workshops, labs and test departments, in particular for lead free work where tip life matters.

Scope of delivery

• Quick 3104 station with soldering iron
• tip 960-I, needle point, 0.2 mm, fitted
• tip 960-3.2D, chisel, 3.2 mm
• stand with brass wool
• additional brass wool sponge
• TT15 tip reactivator
• silicone pad for tip changes
• equipotential lead with crocodile clip
• manual in German

Compatibility

Tips of the QUICK 960 series, shared with the 3103, 969A+, 969B+, 707D+, 709D+ and TS1100. Tips, stand and brass wool can be reordered separately.