9021QC-230-1.0MM Lötdraht-Zuführungsrohr für Lötroboter QUICK ET94xxF-A - Quick QU9021QC-230-1.0

A robot's wire feed reports a jam or a break and stops the run, and the cause often sits in the path the wire travels. 1.0 mm delivers more solder volume per unit of feed, which demands a guide without any edge. The 9021QC-230-1.0 feed tube is matched to this diameter and works on soldering robots of the ET94xxF-A series with a travel range of 400 x 400 x 100 mm and an axis accuracy of ± 0.01 mm.

What the tube does

• Built for 1.0 mm solder wire, so the wire runs with little clearance and no kink right up to the tip.
• Matched to the robots' wire feeder, which alarms on jam or break, and a clean tube keeps that alarm out of the process.
• The wire is perforated automatically during feeding to reduce solder spatter, which calls for a guide free of burrs.
• Original Quick spare part, so the programmed feed length stays valid.
• Also available in 0.5 mm and 0.8 mm, which lets a robot change to another wire diameter without further conversion.

Applications

Automated soldering of printed circuit boards, connectors and cables in series production. Changing the tube belongs to the maintenance of the soldering cell and to any conversion to a different wire diameter.

Compatibility

Made for the ET94xxF-A robot series. The QUICK ET9181 single axis soldering robot uses the 9021C wire guides instead.