ET9181 SEMI-AUTO Einachs-Lötroboter mit Lötdrahtzuführung - Quick QU9181

Hand soldering scatters: every joint gets a slightly different dwell time and a different amount of wire. The ET9181 takes both out of the operator's hands and pins them to fixed values, with solder time adjustable from 0.01 to 9.99 s and wire quantity set separately. The operator positions the work, the cycle itself repeats identically.

Key points

• High-frequency heating with 280 W input and fast recovery, working range 200 to 550 °C.
• Temperature stability of ±3 °C off load, which keeps results comparable across a shift.
• Solder time 0.01 to 9.99 s and wire feed quantity adjustable independently, both shown on the LCD.
• Stepper motor drive, no compressed air supply required.
• Z axis with 100 mm travel, enough clearance for connectors and populated assemblies.
• 1.0 mm solder wire as standard, 0.5 to 1.6 mm optional, covering fine electronics up to heavier terminal work.

Application and compatibility

Typical work includes cable and stranded wire joints, USB and other connectors, terminals, switches and printed circuit boards in small batch and series production. The ET9181 replaces the manual station wherever the same joint has to come out the same way every time. Tips of the QU911G series fit the tool, and the wire path is completed with feed units in the matching wire gauge.