9021QC-230-0.8mm Lötdraht-Zuführungsrohr für Lötroboter QUICK ET94xxF-A - Quick QU9021QC-230-0.8

0,8 mm is the standard diameter in robot soldering. Every millimetre of feed brings noticeably more solder to the joint than 0,5 mm does, which shortens the cycle time on through hole leads, cable lugs, ground points and larger pads. The 9021QC-230-0.8 is the matching guide on QUICK ET94xxF-A soldering robots.

Choosing the diameter

One tube guides exactly one wire diameter. Anyone switching between fine and heavy joints on the same robot keeps both tubes in stock and changes them together with the wire spool. For the fine side there is the 9021QC-230-0.5 with 0,5 mm.

Features

• Bore matched to 0,8 mm wire, so the wire runs with little clearance and no kink right up to the tip.
• More solder volume per feed, which helps on heat draining joints such as ground points and cable lugs.
• The feeder perforates the wire automatically against spatter, which requires the guide to stay smooth inside.
• Original Quick part and a wear item that is replaced regularly in continuous operation.