9021QC-500-0.5MM Lötdraht-Zuführungsrohr für Lötroboter QUICK ET94xxE - Quick QU9021QC-500-0.5

The 9021QC-500-0.5 is the feed tube of the QUICK ET94xxE soldering robots. It guides the solder wire from the feed unit to the tip and is matched to a wire diameter of 0,5 mm. The ET94xxE series works with a travel range of 500 x 400 x 100 mm.

What decides the choice

• Check the robot series first. The number in front of the diameter belongs to the robot generation, and ET94xxE and ET94xxF-A use different tubes.
• The wire diameter comes second. This tube guides 0,5 mm solder wire so the soft wire cannot buckle before it reaches the tip.
• A wear item. A widened or internally soiled tube shows up as a jam or break alarm from the feeder and stops the run.
• Original Quick part, so the feed length stored in the program stays valid.

Applications

Automated soldering of printed circuit boards, connectors and cables in series production. Changing the tube is part of maintaining the soldering cell.

Not to be confused

Robots of the ET94xxF-A series take the 9021QC-230 tubes. The ET9181 single axis soldering robot uses the 9021C wire guides instead.