Kapton solder masking tape polyimide 19 mm x 33 m up to 300 °C - PPI 701/19 MM

Covering larger contact areas, heat sink faces and openings before wave soldering or coating: this Kapton polyimide masking tape is 19 mm wide and resistant up to 300 °C. With a total thickness of 0.055 mm including adhesive the build-up stays minimal.

Benefits

• Resistant up to 300 °C, suitable for wave soldering and reflow
• 19 mm width for area masking with few strips
• Only 0.055 mm total thickness including adhesive
• Brown-transparent for visual inspection of the covered zone
• 33 m roll for continuous production demand

Technical data

Applications

Covering connector strips, gold contacts, test points and housing openings before wave soldering, masking during conformal coating and powder work, plus heat resistant fixing during rework.

Compatibility and scope of delivery

Delivered as one roll of polyimide tape, 19 mm wide and 33 m long. Further widths of the PPI 701 series from 9 to 28 mm are available for other masking widths.