Soldering tip hoof-shaped 2.3 mm SSC 600 series - Metcal SSC-639A

Temperature sensitive components do not tolerate an overheated tip. The SSC-639A cartridge of the SSC 600 series uses Metcal SmartHeat induction technology and holds the tip temperature constant at 357 °C, controlled by the Curie point of the heater layer instead of a sensor.

Benefits

• Fixed tip temperature of 357 °C with no calibration and no temperature setting
• 600 series for temperature sensitive applications and low thermal masses
• Hoof-shaped geometry with 2.3 mm width and 17.8 mm tip length
• Fits the MFR-H6-SSC handpiece of the MFR-1160 and MFR-1161 soldering systems
• Can also be used on the SP200 soldering system

Technical data

Applications

Drag soldering of fine pitch ICs and connector rows, tinning of stranded wires and cable lugs, and rework where a solder reservoir has to be carried in the concave face.

Compatibility and scope of delivery

The cartridge plugs directly into the MFR-H6-SSC handpiece and therefore suits the Metcal MFR-1160 and MFR-1161 soldering systems as well as the SP200 system. It can be changed during operation without tools and reaches working temperature within seconds. Scope of delivery is one SSC-639A soldering cartridge, order unit piece.