Soldering tip bevelled 30 degrees 1.78 mm STTC series - Metcal STTC-035
- This Item: €31.84
- Soldering tip chisel 30 degree 1.78 x 9.9 mm STTC series - Metcal STTC-137LL €27.99
- Soldering tip conical bent 30° 0.4 x 7.9 mm STTC series - Metcal STTC-826 €27.99
A bevelled tip holds a small solder reservoir in its face and releases it evenly while dragging. The STTC-035 is a soldering cartridge bevelled by 30 degrees with 1.78 mm tip width and 6.4 mm tip length. Heating is regulated by the Curie point of the alloy inside the cartridge body, so the 357 °C working temperature is fixed and needs no calibration.
Benefits
- Bevel of 30 degrees holding a defined solder reservoir for clean drag soldering
- Tip width of 1.78 mm for single pins and narrow pin rows
- Short 6.4 mm tip length for stiff guidance
- Fixed 357 °C working temperature without calibration
- For MX-500, MX-5000 and MX-5200 with MX-H1-AVA or MX-RM3E
Technical data
| Item no. | WL13875 |
| Model | STTC-035 |
| Manufacturer | Metcal |
| Manufacturer item no. | STTC-035 |
| Order unit | Piece |
| Product series | STTC series |
| Tip length | 6.4 mm |
| Tip width | 1.78 mm |
| Tip alignment | Sloped |
| Tip temperature | 357 °C |
| Compatible hand piece | MX-H1-AVA, MX-RM3E |
| Weight | 0.1 kg |
Applications
For drag soldering SOIC and QFP rows, for tinning stranded wire and repair wires and for rework where solder has to be added or removed in a controlled way.
Compatibility and scope of delivery
The cartridge runs on the MX-H1-AVA and MX-RM3E hand pieces and therefore on the Metcal MX-500, MX-5000 and MX-5200 systems. It is exchanged without tools while the unit stays powered. Delivery covers one single soldering cartridge without hand piece and without power unit.
| Manufacturer Nr. | STTC-035 |
|---|---|
| Manufacturer | Metcal |
| Weight | 0.100000 |
| GPSR manufacturer information | OK International Ltd Eagle Close, Chandlers Ford GB-SO53 4NF Hampshire www.metcal.com |
| Article authenticity | Original product |
| Condition of article | New |
