Filter mat sets M5/F7 pack of 10 for LRA 400.1 - ULT 02.0.040

With several ULT 400.1 solder fume extractors in operation, individual mat orders add up quickly. The packaging unit with ten M5 and F7 sets consolidates that demand and makes maintenance plannable.

Benefits

• Ten complete prefilter sets, each with one M5 mat and one F7 mat, in a single packaging unit
• Coarse mat rated ISO Coarse 85 percent, fine mat rated ISO ePM10 75 percent, both to ISO 16890
• Both filter classes are changed together, so the staging of the prefilter train stays intact
• Spares the downstream H13 particle filter cassette with its 99.95 percent separation rate and keeps differential pressure low
• Fewer ordering cycles and a dependable stock for planned maintenance intervals

Applications

Useful in production lines, repair centres and laboratories with several ULT 400.1 solder fume extractors. In filter build HA14 the mats sit between the washable expanded metal prefilter and the H13 particle filter cassette, followed by the adsorption filter with 14 kg of activated carbon. Lead free soldering with aggressive fluxes shortens the change intervals, which is where buying in bulk pays off.

Compatibility and scope of delivery

For the LRA 400.1 extraction units in versions MD.17 and MD.21. Delivered as ten sets, each with one M5 and one F7 mat, change frames not included. The ULT 400.1 technical documentation lists this pack of ten under 4-00220, the single set under 4-00219 and the change frame with both mats under 4-00867.