ESD PCB holder, conductive PP, black, 25 slots, 210 x 275 x 95 mm - Warmbier 5366.210.S

Populated boards are safest upright in interim storage, with no components pressing on each other. This holder in volume conductive polypropylene takes 25 boards in 3 mm wide slots spaced about 9.5 mm apart and measures 210 x 275 x 95 mm.

Benefits

• Volume conductive plastic, typical point to point resistance 10^4 - 10^5 Ohm, the property sits in the material.
• 25 slots per holder, boards stand individually and never touch each other.
• Slot spacing of about 9.5 mm leaves room for assemblies populated on both sides.
• 3 mm slot width, matching common board thicknesses.
• Outer size 210 x 275 x 95 mm, compact for benches, trolleys and storage containers.

Application

The holder buffers boards between two operations, for example ahead of soldering, test or final assembly. It also carries assemblies from bench to bench inside the EPA and keeps them within reach at the test station, so nobody has to lay one board flat on another.