Desoldering tip D-inside 1.10 mm long reach 18 mm T series - Thermaltronics T75DT004L

On assemblies with heat sinks, shielding frames or upright electrolytic capacitors a standard desoldering tip often cannot reach the pad. The Thermaltronics T75DT004L is the extended version of the T series, with an 18 mm tip length and a 1.10 mm inside diameter, so recessed plated through holes can still be cleared.

Benefits

• 18 mm tip length for deep and obstructed joints
• 1.10 mm (0.04 in) inside diameter for thin component leads
• Temperature range of 350-398 °C for lead-free solder
• Same geometry as the short T75DT004, so parameters stay unchanged when swapping
• RoHS compliant and suitable for lead-free processes

Applications

Desoldering connectors inside narrow enclosures, work on boards with tall neighbouring parts, and service jobs where the board cannot be fully exposed. It also helps on repairs where the unit is already mechanically assembled.

Compatibility and scope of delivery

For the DS-GUN-2 desoldering hand piece on the TMT-5000S-1 and TMT-5000S-2 stations. One desoldering tip is supplied per order unit.