Soldering tip chisel extra large 5.0 mm T series - Thermaltronics TM60LC650

On ground planes and heavy conductors a narrow tip loses temperature instantly and the joint turns cold. This extra wide T series chisel tip transfers considerably more heat into the work through a 5.0 mm edge and a short 11.4 mm build.

Benefits

• 5.0 mm edge width for maximum contact area and heat transfer
• Short 11.4 mm tip length, so little temperature is lost towards the point
• Suited to ground planes, heavy stranded wire, earth tabs and connector contacts
• Curie point control holds 325-358 °C even under heavy heat draw
• RoHS compliant, for lead-free alloys with higher melting points

Technical data

Applications

Used when soldering earth points and metal tabs, tinning heavy stranded wire, working on power components and building cable assemblies with large cross sections.

Compatibility and scope of delivery

For the SHP-T hand piece of the TMT-5000S-1 and TMT-5000S-2 soldering stations. One soldering cartridge is supplied, order unit piece.