Desoldering tip D-inside 2.40 mm T series for DS-GUN-2 - Thermaltronics T75DT007

On heavy connections desoldering usually fails not because of temperature but because the suction channel cannot take the lead and the molten solder at the same time. The Thermaltronics T75DT007 solves this with a 2.40 mm inside diameter and a 13 mm tip length, covering the upper end of the T desoldering tip series.

Benefits

• Widest bore in the series at 2.40 mm (0.09 in)
• Takes up thick leads together with their solder volume in one pass
• Temperature range of 350-398 °C for lead-free solder
• 13 mm tip length keeps the path from cartridge to joint short
• RoHS compliant and suitable for lead-free processes

Applications

Removal of mains transformers, fuse holders, spade connectors and power terminals, and rework on assemblies with large plated through holes in cabinet and equipment building.

Compatibility and scope of delivery

Suitable for the DS-GUN-2 desoldering hand piece on the TMT-5000S-1 and TMT-5000S-2 stations. One desoldering tip per order unit.