Soldering tip sharp bent 30° 0.5 mm T series - Thermaltronics TM60SB276

Between closely packed components there is rarely room for a straight hand piece. The TM60SB276 is a 30° bent conical cartridge with a 0.5 mm point and 14 mm tip length that approaches joints at a shallow angle without touching neighbouring parts. The working band is 325-358 °C.

Benefits

• Bent point 0.5 mm wide for single terminations in tight surroundings
• 14 mm tip length gives access over taller components
• Fixed 325-358 °C band, suited to lead-free alloys with moderate heat demand
• Heat is generated inside the cartridge, so it comes back to temperature quickly after a change
• Lead-free and RoHS compliant

Technical data

Applications

Rework on densely populated assemblies, soldering single chip components next to taller neighbours, attaching thin stranded wire and test leads and correcting connector pins.

Compatibility and scope of delivery

For the SHP-T hand piece and the TMT-5000S-1 and TMT-5000S-2 stations. A single soldering cartridge is supplied.