WXsmart rework set 300 W with WXair module and WXDP 120 desoldering iron - Weller T0053456699

Rework on populated boards needs heat, suction and air at the same bench. This set provides all three from one 300 W supply unit, and the WXair module adds an air and a vacuum channel. The WXDP 120 desoldering iron pulls at 70 kPa while the WXUPS MS ultra iron puts 150 W into the joint.

Benefits in use

• The WXair module with one air and one vacuum channel turns the two channel station into a full rework station.
• The WXDP 120 desoldering iron with 70 kPa vacuum clears plated through holes without a separate pump.
• The WXUPS MS ultra iron delivers 150 W at 24 V and heats up in 7 seconds for large components from 1612 upwards.
• Smart tips with an individual serial number and parameter storage in the tool keep the process auditable.
• Two safety rests, WSR 200 and WSR 207, are included so every tool has a fixed place.
• Control range 100 to 450 °C with a stability of +/- 2 °C, ambient temperature 10 to 40 °C.

Technical data

Applications

Repair, rework and prototype building in electronics, medical technology, aerospace and automotive. One bench covers soldering, desoldering and hot air without a second unit standing next to it.

Scope of delivery

• 1x WXsmart supply unit
• 1x WXair rework module
• 1x WSR 207 safety rest
• 1x WXDP 120 desoldering iron
• 1x WSR 200 safety rest
• 1x WXUPS MS soldering iron
• 1x RTUS 032 S MS soldering tip
• 1x WCTH tip holder
• 1x mains plug
• 1x operating manual

Compatibility

The WXUPS MS ultra iron works with the RTUS MS tip series. Together with the WXair module a total of 16 tools can be operated at the station.

Standards and compliance

The station and the connected tools are ESD safe. The manufacturer lists this set under the MIL-SPEC specification.