WXsmart rework set 300 W with ultra soldering iron and ultra tweezers - Weller T0053458699

Large components can only be lifted when both terminations get enough heat at the same time. The set provides the ultra tweezers and the ultra iron, each rated 150 W at 24 V and both using Thermal Core technology. Heat-up takes 7 seconds and the station controls two channels with 300 W.

Benefits in use

• Ultra tweezers and ultra iron rated 150 W at 24 V each, designed for component sizes from 1612 upwards.
• Heat-up time of 7 seconds on both tools, with the Active-Tip cartridge sitting right behind the tip.
• Thermal Core technology carries the heat through the joint, including multilayer boards.
• Smart tips with an individual serial number and parameter storage in the tool keep the process auditable.
• The WXUTS tweezer set with RTWUS 015 B tip and WSR 210 rest is included, so nothing has to be added.
• Station with 300 W and two soldering channels, and 12 tools in total can be connected to WXsmart.

Applications

Electronics, medical technology, aerospace and automotive. The bench is laid out for rework on power components, connectors and large ground areas.

Compatibility

Both ultra tools work with the RTUS MS tip series. The WXsmart supply unit carries two soldering channels and accepts up to 12 tools.

Standards and compliance

The station and the connected tools are ESD safe. The manufacturer lists this set under the MIL-SPEC specification.