Guide kit for SFR-B solder wire feeder, wire 0.8 mm, length 0.7 m, without perforation - JBC GSFR08D07-B

In an automatic soldering process the wire guide decides how steady the feed stays. Guide kit GSFR08D07-B bridges 0.7 m between the wire spool and the joint and is matched to solder wire of 0.8 to 0.82 mm.

Benefits

• Channel matched to wire of 0.8 to 0.82 mm, which keeps the feed even and free of jamming.
• Guide length 0.7 m (700 mm), suited to setups where the SFR-B sits away from the soldering head.
• Version without solder wire perforation, for processes that run unperforated wire.
• Changing the wire diameter only means changing the guide kit, the feeder itself stays as it is.
• ESD safe design, therefore usable at workstations inside the EPA.
• Part of the SFR-B model line, sales unit 1 piece.

Technical data

Applications

Automated soldering in electronics manufacturing, robot soldering cells with soldering head and control box, assembly lines with repeating joints. Wherever solder wire of 0.8 mm has to be metered in and the process is meant to run without operator intervention.

Compatibility and scope of delivery

Suitable for the JBC SFR-B automatic solder wire feeder. Guide kits are also available with solder wire perforation and for further wire diameters and guide lengths, the matching version is listed in the feeder manual. Delivery is one guide kit, sales unit 1 piece.

Notes

The guide kit is a wear part. If the channel shows visible abrasion or the feed becomes uneven, replace it before joints start to receive too little solder.