Guide tube for 0.5 mm solder wire, SFR-B, length 0.3 m, ESD safe - JBC 0029667

Between the spool holder and the feeder there is an open stretch where thin solder wire is easily bent. This guide tube of 300 mm bridges it and accepts wire from 0.46 to 0.56 mm.

What the part does for you

• Bore for solder wire from 0.46 to 0.56 mm, so nominal 0.5 mm wire runs through without jamming.
• Length of 0.3 m bridges the distance between the spool holder and the feeder.
• Protects thin wire against kinks and contamination along the open stretch.
• ESD safe design for workstations inside an EPA.
• Spare part of the SFR-B line, replaced on its own after wear or when the cell is rebuilt.

Applications

Automated soldering cells where the wire spool sits away from the soldering head, robot systems with a moving axis, and replacement of a worn wire path.

Compatibility and scope of delivery

Intended for the JBC SFR-B automatic solder wire feeder. The delivery consists of one guide tube with a length of 0.3 m. Manufactured by JBC Soldering SL.