Guide tube for solder wire 0.46 to 0.56 mm, SFR-B, length 1000 mm - JBC 0029669

Between spool and soldering head the solder wire must neither chafe nor snag, otherwise the force at the feed varies. This guide tube carries the wire over the whole distance and at 1000 mm is long enough to place the spool outside the robot cell.

Key benefits

• Length of 1000 mm, so the wire spool can stand clear of the working area and a spool change needs no access to the cell.
• Bore sized for wire from 0.46 to 0.56 mm, the wire runs guided and without forming loops.
• Even friction along the whole run, which keeps the feed force at the drive wheel predictable.
• ESD safe according to the data sheet and therefore fit for use inside an electrostatic protected area.

Applications

Automated soldering with the SFR-B feeder in robot cells and at automatic workstations where the wire spool is mounted at a distance from the soldering head.

Compatibility and scope of delivery

For the SFR-B automatic solder wire feeder and solder wire from 0.46 to 0.56 mm. One tube of 1000 mm length is supplied.

Standards and compliance

ESD safe according to the manufacturer data sheet. Manufacturer is JBC Soldering SL in Spain.