ESD Extraction arm DN75 for wall and ceiling mounting, 3 joints, conductive PP, 1200 mm, black - Alsident 75-3590-3-6

The extraction arm captures solder fumes, vapours and dust right at the source, before they reach the breathing zone. With a 75 mm tube diameter and a recommended air volume of 80 to 180 m³/h it is built for wall and ceiling mounting. Reach is 1200 mm.

As an ESD version, the arm discharges static via the supplied earthing cable with a 1 MΩ safety resistor and can be used inside EPAs.

Benefits in use

• Tubes and joints in impact-resistant, conductive and chemically resistant polypropylene
• Maintenance-free conductive O-rings in the joints
• Integrated throttle damper that swings fully out of the airflow when open, giving maximum flow
• Threaded rods, springs and finger screws in acid-resistant AISI 316L stainless steel
• Rivets in conductive, chemically resistant polypropylene, suited to aggressive atmospheres
• Tool-free disassembly for cleaning

Applications

Soldering stations in electronics production and repair, laboratories, bonding and potting stations, and workplaces with solvent vapours. The arm connects to an extraction unit or a central extraction system.

Standards and compliance

Tested for use in ESD areas to IEC 61340-5-1. Tested for ESD/Ex areas to EN 80079-36:2016 and EN 80079-37:2016 under ATEX Directive 2014/34/EU, marking Ex II 1 GD. RoHS compliant.