Solder fume extraction ZeroSmog Guard 2 Kit 2 200 m³/h with two extraction arms - Weller FT91026699

One extraction unit for two soldering positions only pays off if both channels keep enough suction when used at the same time. The ZeroSmog Guard 2 Kit 2 delivers 200 m³/h at 2250 Pa and supplies arms, nozzles and shut-off valves for both positions. Power consumption is 142 W from 220 to 240 V.

Key benefits

• Two 0F10 extraction arms of 1 m each and two ALFA funnel nozzles are included.
• Two WFV shut-off valves isolate one channel and keep suction up at the second position.
• Two flexible hoses of 3 m each allow free placement of the filter unit.
• Main filter with HEPA H13, activated carbon and potassium permanganate for particles and aggressive gases.
• 200 m³/h of volume flow and 2250 Pa of vacuum for two hand soldering positions.
• Filter status indicator, light bar and ESD-safe design.

Technical data

Applications

Two adjacent hand soldering benches in electronics production, in repair and test areas or in the laboratory. Both positions run on one filter unit, which saves floor space and a second set of filters.

Connection and scope of delivery

All parts join through Weller Easy-Click 60, so other nozzle shapes and hose lengths can be added. Supplied are the 230 V filter unit, one main filter with HEPA H13, activated carbon and potassium permanganate, five pre-filters, two ALFA nozzles, two 0F10 hoses, two WFV shut-off valves and two flexible 3 m hoses.

Manufacturer and compliance

ESD-safe design for electronics workplaces according to the manufacturer's specification table. The manufacturer is WELLER Tools GmbH, Carl-Benz-Strasse 2, DE-74354 Besigheim, Germany.