4-channel supply unit 200 W for 13 soldering tools, 90 to 450 °C, 230 V - JBC DME-2B

Anyone switching between soldering iron, desoldering iron and tweezers at a rework bench loses time replugging and reheating. The DME-2B supplies four tools in parallel and keeps each of them ready with up to 150 W peak power across a range of 90 to 450 °C. Operation runs through a seven button interface, and the display splits as soon as two tools are active.

Key benefits

• Four channels at once, each with up to 150 W peak power, so iron, desoldering iron, tweezers and hot air stand ready side by side.
• Compatible with 13 JBC tools, among them T210, T245, DS360, DT530, DR560, AP250, PA120, AM120, HT420 and AT420.
• Temperature range of 90 to 450 °C with a stability of 1.5 °C and an accuracy of three percent using a reference cartridge.
• Split screen display from two connected tools onwards, plus a connection for a foot pedal.
• USB-A for firmware, graphs and profiles, USB-B for PC communication, RJ12 for extraction, peripherals and robots.
• Switching power supply with improved thermal performance, sleep and hibernation modes extend cartridge life.

Technical data

Applications

Rework and repair benches running several tools, prototyping, laboratory production and service centres where soldering, desoldering and extraction meet at one place.

Compatibility and scope of delivery

Compatible with the MSE-B, MVE-A and MNE-A modules, not with MSE-A. One control unit is supplied. A complete working system additionally needs a stand, a tool and a matching cartridge.

Standards and compliance

Voltage and resistance between tip and ground meet and exceed ANSI/ESD S20.20 and IPC J-STD-001F according to the manufacturer. The property table lists the unit as ESD safe.