ESD Soldering Station with Automatic Wire Feed and ALEP250 Angled Iron, 180 W, 230 V - JBC ALEP-210VA

In series production, repeatability decides the quality of every joint. The ALEP-210VA feeds solder wire automatically with a set length and speed and controls the tip with 180 W at a temperature stability of 1.5 °C. The operator holds the ALEP250 angled iron in a natural hand position and keeps the second hand free to place the component.

Benefits

• 180 W rated power and a 90 to 450 °C range for consistent results over long shifts.
• Trigger-operated wire feed with three modes: Continuous, Discontinuous and Program for feed speed and wire length.
• Wire diameter 0.4 to 1.8 mm with the matching guide set, factory-fitted for 1 mm wire.
• Wire perforation from 0.8 mm: better flux outgassing, less spatter and foreign object debris.
• Holds solder wire spools up to 2 kg for fewer reel changes on the line.
• Connectivity for data download, remote control for traceability and software updates.

Applications

THT and connector soldering in series production, cable assembly, rework on high-throughput lines with repetitive soldering tasks.

In the box

• ALE control unit with automatic wire feed, GALE10V guide set pre-fitted
• ALEP250 angled soldering iron with automatic feed
• ALE-SA stand for ALEP250 and ALE250-A irons
• SCH cartridge and tip holder
• C250403 cartridge, conical bent, Ø 1 mm
• PLR196 cartridge extractor pliers
• P405 foot pedal

Compatibility

The ALEP250 works only with the ALE control unit and takes C250 and C250E series cartridges.